Default; Description - HP MSR series Command Reference Manual

default

Use default to restore the default setting for the VT or MP-group interface.
Syntax
default
Views
VT interface view, MP-group interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default setting of interface VT 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] default
This command will restore the default settings. Continue? [Y/N]:y
# Restore the default setting of interface MP-group 3.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to set the description for the VT or MP-group interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
A VT or MP-group interface is described in the form of interface name Interface (for example,
Virtual-Template1 Interface).
20