Fr Map Ppp; Ipv6 Frame Relay Configuration Commands; Display Fr Ipv6 Map-Info - HP MSR series Command Reference Manual

fr map ppp

Use fr map ppp to map the frame relay DLCI (corresponds to an Frame Relay PVC) to a PPP link, so the
PPPoFR link is established, and PPP packets can be sent/received on FR PVC. The configuration of this
PPP link depends on the configuration on the interface specified by interface virtual-template
interface-number.
Use undo fr map ppp to cancel this map, and eliminates this PPPoFR link.
Syntax
fr map ppp dlci-number interface virtual-template interface-number
undo fr map ppp [ dlci-number ]
Views
Interface view
Default command level
2: System level
Parameters
dlci-number: Specific a DLCI number, in the range 16 to 1007.
virtual-template interface-number: Specifies a virtual template interface number, in the range 0 to 1023.
Examples
# Map DLCI 100 to PPP and establish PPPoFR link on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr map ppp 100 interface virtual-template 1

IPv6 frame relay configuration commands

display fr ipv6 map-info

Use display fr ipv6 map-info to display IPv6 address mappings.
Syntax
display fr ipv6 map-info { static | dynamic | all } [ interface interface-type { interface-number |
interface-number.subnumber }] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
static: Displays static IPv6 address mappings.
dynamic: Displays dynamic IPv6 address mappings.
all: Displays all IPv6 address mappings.
156