HP MSR series Command Reference Manual page 398

Default
The delay waiting for response is 5 seconds.
Views
System view
Default command level
2: System level
Parameters
seconds: Delay time in seconds, in the range 5 to 2147483. The delay waiting for response after inviting
PAD clear procedure.
Usage guidelines
The server of X.25 PAD may send an Invite Clear message to the client, for example, after receiving a quit
request from client or in order to release the link. At the same time, a timer is started. If no response is
received on expiration of the timer, the server clears the link.
Examples
# Set the delay waiting for response after the PAD clear procedure is initiated to 1000 seconds.
<Sysname> system-view
[Sysname] x29 timer inviteclear-time 1000
386