Modem Management Commands; Modem; Modem Auto-Answer - HP MSR series Command Reference Manual

Modem management commands

The modem management commands are available to AUX interfaces, asynchronous/synchronous serial
interfaces operating in the asynchronous mode, and other asynchronous interfaces. They are unavailable
to console ports.

modem

Use modem to enable modem call-in, modem call-out, or both on a user interface.
Use undo modem to disable modem call-in, modem call-out, or both.
Syntax
modem [ both | call-in | call-out ]
undo modem [ both | call-in | call-out ]
Default
Both modem call-in and call-out are disabled.
Views
User interface view
Default command level
2: System level
Parameters
both: Enables both modem call-in and modem call-out.
call-in: Enables only modem call-in.
call-out: Enables only modem call-out.
Examples
# Enable modem call-in on user-interface 1.
<Sysname> system-view
[Sysname] user-interface tty 1
[Sysname-ui-tty1] modem call-in

modem auto-answer

Use modem auto-answer to configure a modem to operate in auto-answer mode.
Use undo modem auto-answer to configure a modem to operate in non-auto-answer mode. With the
command configured, the modem answers a call only when it receives the AT command sent by the
device.
Syntax
modem auto-answer
undo modem auto-answer
191