Dlsw Max-Transmission; Dlsw Multicast - HP MSR series Command Reference Manual

[Sysname] dlsw reverse 0012-3578-4521
Reversed MAC address: 0048-ac1e-a284
# Convert the token ring MAC address 0048-ac1e-a284 to the Ethernet format.
[Sysname] dlsw reverse 0048-ac1e-a284
Reversed MAC address: 0012-3578-4521
Related commands
sdlc mac-map remote

dlsw max-transmission

Use dlsw max-transmission to set the maximum number of attempts the DLSw v2.0 router makes to send
an explorer frame.
Use undo dlsw max-transmission to restore the default.
Syntax
dlsw max-transmission retries
undo dlsw max-transmission
Views
System view
Default command level
2: System level
Parameters
retries: Maximum number of attempts that the DLSw v2.0 router makes to send an explorer frame. The
value range is 1 to 10, and the default is 5.
Usage guidelines
Each time the origin DLSw v2.0 router sends an explorer frame in a UDP multicast or unicast, an explorer
timer starts. If no acknowledgment is received before the explorer timer times out, the router retransmits
the explorer frame and resets the explorer timer, until it receives an acknowledgment or the maximum
number of explorer frame retries is reached.
Use this command only after enabling DLSw v2.0 multicast.
Examples
# Set the maximum number of explorer frame transmission retries to 10.
<Sysname> system-view
[Sysname] dlsw max-transmission 10

dlsw multicast

Use dlsw multicast to enable the multicast function of DLSw v2.0.
Use undo dlsw multicast to disable the multicast function of DLSw v2.0.
Syntax
dlsw multicast [ multicast-ip-address ] interface interface-type interface-number
undo dlsw multicast
260