Views
System view
Default command level
2: System level
Usage guidelines
After the function is enabled, PRI interfaces actively send RESTART messages to clear calls of the remote
end before maintaining B channels.
Examples
# Enable the PRI interface to send RESTART messages before maintaining B channels.
<Sysname> system-view
[Sysname] isdn send-restart
isdn service
Use isdn service to specify the service type in the ISDN Bearer Compatibility signaling.
Use undo isdn service to restore the default.
Syntax
isdn service [ audio | data | speech ]
undo isdn service
Default
The service type in the ISDN Bearer Compatibility signaling is speech.
Views
ISDN interface (voice interface) view
Default Level
2: System level
Parameters
audio: Specifies the 3.1 kHz audio service.
data: Specifies the unrestricted digital information service.
speech: Specifies the speech service.
Usage guidelines
This command is available only on voice interfaces such as BSV, VE1, and VT1 interfaces.
Examples
# Specify the service type as audio in the ISDN Bearer Compatibility signaling.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn service audio
96