Ppp Pfc Remote - HP MSR series Command Reference Manual

Syntax
ppp pfc local request
undo ppp pfc local
Default
The local end does not include the PFC option in its outbound LCP negotiation requests.
Views
Interface view
Default command level
2: System level
Parameters
request: Specifies that the local end includes the PFC option in its outbound LCP negotiation requests.
Examples
# Configure port Serial 2/0 to send PFC requests during PPP negotiation.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp pfc local request

ppp pfc remote

Use ppp pfc remote to configure how the local end handles the PFC requests received from the remote
peer.
Use undo ppp pfc remote to restore the default.
Syntax
ppp pfc remote { apply | ignore | reject }
undo ppp pfc remote
Default
The device accepts PFC requests received from a remote peer, but does not perform PFC on frames sent
to the peer.
Views
Interface view
Default command level
2: System level
Parameters
apply: Configures the local end to accept PFC requests received from the remote peer and to perform
PFC on frames sent to the peer.
ignore: Configures the local end to accept PFC requests received from the remote peer, but not to perform
PFC on frames sent to the peer.
reject: Configures the local end to reject PFC requests sent from the remote peer.
15