Frame Relay Compression Configuration Commands; Display Fr Compress - HP MSR series Command Reference Manual

Parameters
Name: Name of an X.25 template, which is a string of 1 to 30 characters.
Usage guidelines
If the X.25 template identified by the name argument already exists, the x25 template command directly
leads you to X.25 template view. The X.25-/LAPB-related parameters are configured in X.25 template
view.
Examples
# Create an X.25 template named vofr.
<Sysname> system-view
[Sysname] x25 template vofr
[Sysname-x25-vofr]

Frame relay compression configuration commands

display fr compress

Use display fr compress to display the statistics information about frame relay compression.
Syntax
display fr compress [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the DLCI statistics for all main interfaces.
Examples
# Display the frame relay compression statistics of FRF.9 stac.
<Sysname> display fr compress
Serial2/0
-DLCI:22
135