Display Isdn Spid - HP MSR series Command Reference Manual

Item
T203(sec)
N200
K(Bri)
K(Pri)
Timer-Number
Value(sec)

display isdn spid

Use display isdn spid to view information on SPID on the BRI interface encapsulated with the NI protocol.
Syntax
display isdn spid [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You may execute this command to view the SPID type, SPID value and some other information when
ISDN is running. If no interface is specified, this command displays information on SPID on all the
NI-supported BRI interfaces.
Examples
# Display the related information of SPID on the NI-supported interface BRI 2/0.
<Sysname> display isdn spid interface bri 2/0
Interface Bri2/0 :
SPID Type: AUTO
SPID B1:
Description
Maximum link idle time (in seconds) of the ISDN L2
protocol.
Maximum number of retransmissions.
Maximum number of unacknowledged frames (sliding
window size) on the ISDN BRI port.
Maximum number of unacknowledged frames (sliding
window size) on the ISDN PRI port.
ISDN L3 timer.
Timeout value (in seconds) of each ISDN L3 timer.
72