Display X25 Map - HP MSR series Command Reference Manual

begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You can use this command to learn the hunt group of the router and the information about the interfaces
and XOT channel inside the hunt group.
Examples
# Display the status information of the X.25 hunt group named hg1.
<Sysname> display x25 hunt-group-info hg1
HG_ID : hg1
member
Serial2/1
Serial2/0
1.1.1.1
Table 69 Command output
Field
HG_ID : hg1
HG_Type: round-robin
member
state
vc-used
in-pkts
out-pkts
Related commands
x25 hunt-group

display x25 map

Use display x25 map to display the X.25 address mapping table.
Syntax
display x25 map [ | { begin | exclude | include } regular-expression ]
HG_Type: round-robin
state vc-used
Last used 2
Next 1
Normal 1
in-pkts out-pkts
51 20
21 15
24 3
Description
The hunt group name is hg1.
Hunt group call channel selection policy (including
round-robin and vc-number).
Interfaces or XOT channel contained in hunt group.
State of the current interface or XOT channel:
•
Last used—latest used.
•
Next—next selected.
•
Normal—normal state.
•
Unavail—Unavailable state.
Number of calls on the interface or XOT channel
(including call success and call failure).
Input flow on the interface or XOT channel in packets.
Output flow on the interface or XOT channel in
packets.
337