Examples
# Configure the progress indicator value as 8 for the ISDN signaling messages sent by interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn progress-indicator 8
isdn protocol-mode
Use isdn protocol-mode to set the protocol mode for an ISDN interface.
Use undo isdn protocol-mode to restore the default protocol mode.
Syntax
isdn protocol-mode mode
undo isdn protocol-mode
Default
An ISDN interface operates in user side mode.
Views
Interface view
Default command level
2: System level
Parameters
mode: ISDN protocol mode to be set, which can be network (for network side mode) and user (for user
side mode).
Examples
# Set the protocol mode to network side mode for BRI 2/0 interface (assuming that the interface is a BSV
interface).
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn protocol-mode network
isdn protocol-type
Use isdn protocol-type to set the ISDN protocol to be run on an ISDN interface.
Use undo isdn protocol-type to restore the default.
Syntax
isdn protocol-type protocol
undo isdn protocol-type
Default
Both BRI and PRI interfaces run ISDN protocol DSS1.
Views
ISDN interface view
93