Fr Dlci - HP MSR series Command Reference Manual

Field
Modulo
K
Timers
Channels
Window size
Packet size
LAPB parameters
Modulo
N1
N2
Timers
Related commands
• x25 template
x25-template
•

fr dlci

Use fr dlci to configure a virtual circuit on a frame relay interface and enter the view of the virtual circuit.
Use undo fr dlci to remove a virtual circuit. If no virtual circuit is specified, all virtual circuits on the
interface are removed.
Syntax
fr dlci dlci-number
undo fr dlci [ dlci-number ]
Description
Window modulo, which defaults to 8.
Maximum number of outstanding sequenced frames for a DTE or DCE.
Timers:
•
Idle—Maximum idle period of SVCs.
•
T10/T20—Delay of the re-start/re-transmission timer.
•
T1 1/T21—Delay of the call request transmission timer.
•
T12/T22—Delay of the reset request transmission timer.
•
T13/T23—Delay of the clear request transmission timer.
Channel range types:
•
Incoming-only—Channel range of incoming-only calls.
•
Two-way—Two-way channel range.
•
Outgoing-only—Channel range of outgoing-only calls.
Window size:
•
In—Receiving window size.
•
Out—Transmitting window size.
Packet size:
•
In—Maximum X.25 packet size allowed for receiving.
•
Out—Maximum X.25 packet size allowed for transmitting.
LAPB-related settings.
Modulo for numbering LAPB frames.
Maximum packet size (in bytes) a DCE/DTE allows.
Maximum number of retries allowed for an DTE/DCE to transmit a packet.
Timers:
•
T1—Transmission timer.
•
T2—Receiving timer.
•
T3—Idle channel timer.
117