Display L2Tp Tunnel - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Related commands
display l2tp tunnel
display l2tp tunnel
Use display l2tp tunnel to display information about L2TP tunnels.
Syntax
display l2tp tunnel [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
Total tunnel = 1
LocalTID RemoteTID RemoteAddress
1
Table 59 Command output
Field
Total tunnel
LocalTID
RemoteTID
RemoteAddress
Port
Sessions
RemoteName
1
20.1.1.2
Port
Sessions RemoteName
1701
1
lns
Description
Number of active tunnels.
Unique ID of the tunnel at the local end.
Unique ID of the tunnel at the remote end.
IP address of the peer.
Port number of the peer.
Number of sessions within the tunnel.
Name of the tunnel at the peer.
287
Advertisement
Table of Contents
