X25-Template - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Related commands
fr lmi t392dce
x25-template
Use x25-template to apply an X.25 template to a VC.
Use undo x25-template to cancel the X.25 template application.
Syntax
x25-template name
undo x25-template name
Views
DLCI interface view
Default command level
2: System level
Parameters
Name: Name of an X.25 template, which is a string of 1 to 30 characters.
Usage guidelines
Annex G implements X.25 over FR. You can configure X.25 parameters for an X.25 over FR DLCI by
using the x25 template command and apply the template in DLCI interface view.
Examples
# Apply the X.25 template named vofr to DLCI 100.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr dlci 100
[Sysname-fr-dlci-Serial2/0-100] annexg dte
[Sysname-fr-dlci-Serial2/0-100] x25-template vofr
x25 template
Use x25 template to create an X.25 template or enter X.25 template view.
Use undo x25 template to remove an X.25 template.
Syntax
x25 template name
undo x25 template name
Views
System view
Default command level
2: System level
134
Advertisement
Table of Contents
