Ppp Mp User - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
the member channels in an MP bundle. If the calculated MP sort buffer size is 20, the MP sort buffer can
sort 20 packets.
Use undo ppp mp sort-buffer-size to restore the default.
Syntax
ppp mp sort-buffer-size size
undo ppp mp sort-buffer-size
Default
The MP sort buffer size factor is 1.
Views
Virtual template interface view, MP-group interface view
Default command level
2: System level
Parameters
size: Specifies the MP sort buffer size factor in the range of 1 to 64.
Usage guidelines
When MP is used, the received packets might be out of order. The sort buffer is used to re-sort packets.
The sort buffer size is a trade-off between re-sorting effect and delay. A large sort buffer brings good
re-sorting effect but increases delay. For voice packets, the transmission delay should be minimized.
Examples
# Configure the MP sort buffer size factor as 64.
<Sysname> system-view
[Sysname] interface virtual-template 0
[Sysname-Virtual-Template0] ppp mp sort-buffer-size 64
ppp mp user
Use ppp mp user to specify to add PPP links with specific usernames to the corresponding MP bundles
according to usernames.
Use undo ppp mp user to remove a username-based MP bundle.
Syntax
ppp mp user username bind virtual-template number
undo ppp mp user username
Views
System view
Default command level
2: System level
Parameters
username: Username, a string of 1 to 80 characters.
virtual-template number: Specifies a virtual-template number in the range of 0 to 1023.
38
Advertisement
Table of Contents
