L2Tp Enable; L2Tp-Auto-Client Enable - HP MSR series Command Reference Manual

[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]
Related commands
allow l2tp

l2tp enable

Use l2tp enable to enable the L2TP function.
Use undo l2tp enable to disable the L2TP function.
Syntax
l2tp enable
undo l2tp enable
Default
The L2TP function is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
L2TP must be enabled for relevant L2TP configurations to take effect.
Examples
# Enable the L2TP function.
<Sysname> system-view
[Sysname] l2tp enable
Related commands
l2tp-group

l2tp-auto-client enable

Use l2tp-auto-client enable to trigger an LAC to establish an L2TP tunnel.
Use undo l2tp-auto-client enable to remove the established L2TP tunnel.
Syntax
l2tp-auto-client enable
undo l2tp-auto-client enable
Default
An LAC does not establish an L2TP tunnel.
Views
VT interface view
290