Display Isdn Parameters - HP MSR series Command Reference Manual

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Executing this command will display information of the calls activated up to now, but the number of
retained entries is limited to 100.
Examples
# Display the information of ISDN call history.
<Sysname> display isdn call-record
-------------------------------------------------------------------------------
Call Calling
Type Number
-------------------------------------------------------------------------------
In 10660016
In 10660022
Out -
Out -
In 10660016
In 10660022
Table 11 Command output
Field
Call Type
Start Time
Stop Time
Seconds Used

display isdn parameters

Use display isdn parameters to view the system parameters at Layer 2 and Layer 3 of the ISDN protocol,
such as the system timers and frame size.
Syntax
display isdn parameters { protocol | interface interface-type interface-number } [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
protocol: ISDN protocol type, which can be 5ess, ans, at&t, dss1, etsi, ni, ni2, ntt, or qsig.
Called
Number
10660016 03-07-05 11:23:09
10660022 03-07-05 11:23:09
660016 03-07-05 11:23:01
660022 03-07-05 11:23:01
10660016 03-07-05 11:23:01
10660022 03-07-05 11:23:01
Start Stop
Time Time
-
-
03-07-05 11:23:04
03-07-05 11:23:04
03-07-05 11:23:04
03-07-05 11:23:04
Description
Call type:
•
Incoming.
•
Outgoing.
Time at which the call is set up.
Time at which the call is terminated.
Duration of the call in seconds.
70
Seconds
Used
0
0
3
3
3
3