Session Management Commands; Application Aging-Time - HP HSR6600 Command Reference Manual

Session management commands

application aging-time

Use application aging-time to set the aging timer for the sessions of an application layer protocol.
Use undo application aging-time to restore the default.
Syntax
application aging-time { dns | ftp | msn | qq | sip } time-value
undo application aging-time [ dns | ftp | msn | qq | sip ]
Default
The default session aging times for the application layer protocols vary with device models.
Views
System view
Default command level
2: System level
Parameters
dns: Specifies the aging time for DNS sessions.
ftp: Specifies the aging time for FTP sessions.
msn: Specifies the aging time for MSN sessions.
qq: Specifies the aging time for QQ sessions.
sip: Specifies the aging time for SIP sessions.
time-value: Specifies the aging time in seconds, in the range of 5 to 100000.
Usage guidelines
If no application layer protocol type is specified, the command restores the session aging timers for the
application layer protocols to the defaults.
The default session aging times for the application layer protocols are as follows:
• DNS: 60 seconds
FTP: 3600 seconds
•
MSN: 3600 seconds
•
QQ: 60 seconds
•
SIP: 300 seconds
•
Examples
# Set the aging timer for FTP sessions to 1800 seconds.
<Sysname> system-view
[Sysname] application aging-time ftp 1800
418