Managing A Modem; Feature And Hardware Compatibility; Modem Management Configuration Task List; Configuring Modem Access Services On A User Line - HP MSR Router Series Wan Access Configuration Manual

Managing a modem

This chapter describes how to manage and control the modems connected to the device.

Feature and hardware compatibility

This feature is available only on the following modules or interfaces:
AM interface modules.
•
ASE interface modules
•
• AUX interfaces.
SAE interface modules operating in asynchronous mode.
•

Modem management configuration task list

Tasks at a glance
(Required.)
line
(Required.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Required.)

Configuring modem access services on a user line

CAUTION:
This task disconnects the modem connection that has been established on the user line.
Perform this task to configure a user line for incoming modem calls, outgoing modem calls, or both.
To configure the modem access services on user lines:
Configuring modem access services on a user
Setting the answer timeout timer
Setting the modem answer mode
Enabling a modem to obtain caller numbers
Enabling modem callback
Issuing an AT command to a modem
Setting the country code of a modem
Remarks
Configure a user line for incoming modem calls,
outgoing modem calls, or both.
Increase the answer timeout timer on a slow link
for a successful modem connection
establishment.
You must set the modem answer mode on a user
line to be the same as the connected modem.
This task is for point of sale (POS) terminal access
services. Perform this task if a bank front end
processor requires the call numbers of POS
terminals for terminal identification.
Enable modem callback if the remote end
connected to the modem requires a callback.
N/A
You must set the correct country code for the
modem to operate correctly.
153