Display Portal Interface - HP HSR6600 Command Reference Manual

Field
Destination
IP
Mask
Port
Protocol
Related commands
portal free-rule

display portal interface

Use display portal interface to display the portal configuration of an interface.
Syntax
display portal interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the portal configuration for interface GigabitEthernet 3/0/1.
<Sysname> display portal interface gigabitethernet 3/0/1
Portal configuration of GigabitEthernet 3/0/1
IPv4:
Status: Portal running
Portal server: servername
Portal backup-group: 1
Authentication type: Layer3
Authentication domain: my-domain
Authentication network:
Source
Destination IP: 11.1.1.0
Description
Destination information in the portal-free rule.
Destination IP address in the portal-free rule.
Subnet mask of the destination IP address in the portal-free rule.
Destination transport layer port number in the portal-free rule.
Transport layer protocol number in the portal-free rule.
IP: 1.1.1.1
164
Mask : 255.255.0.0
Mask: 255.255.255.0