Display Interface Tunnel - HP MSR Series Command Reference Manual

B4 address
Chassis 2 Slot 0 Cpu 0:
B4 address
Chassis 2 Slot 1 Cpu 0:
B4 address
Chassis 2 Slot 2 Cpu 0:
B4 address
1::1
Table 96 Command output
Field
Slot 0 Cpu 0
Slot 1 Cpu 0
Chassis 1 Slot 0 Cpu 0
B4 address
Tunnel ID
Tunnel interface
Idle time

display interface tunnel

Use display interface tunnel to display information about tunnel interfaces, including the source address,
destination address, and tunnel mode.
Syntax
display interface [ tunnel [ number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number: Specifies the number of a tunnel interface.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
Tunnel ID
Tunnel ID
Tunnel ID
Tunnel ID
0x029c60ee
Description
Information about CPU 0 in slot 0.
Information about CPU 0 in slot 1.
Information about CPU 0 in slot 0 on chassis 1.
IPv6 address of the B4 router.
Tunnel ID that the IPv6 address of the B4 router maps to.
ID of the tunnel interface on the DS-Lite tunnel to which the mapping
belongs.
When the tunnel to which the mapping belongs is removed or a
tunnel with the same ID but different mode is created, this field
displays hyphens (--).
Remaining time in minutes for the mapping between the IPv6 address
of the B4 router and tunnel ID.
When the mapping ages out but is still applied by a session, this field
displays hyphens (--).
455
Tunnel interface Idle time
Tunnel interface Idle time
Tunnel interface Idle time
Tunnel interface Idle time
900 18