Device Configuration Using Web Interface - Proxim ORiNOCO AP-800 Installation And Management Manual

Device Configuration Using Web Interface

This chapter contains information on how to configure the device by using Web Interface. Note that you can also configure
the device by using other interfaces like CLI and SNMP.
Following topics are covered in this chapter:
• System
• Network
IP Configuration
–
Link Integrity
–
Spanning Tree Protocol (STP)
–
• Ethernet
• Wireless Interface
Interface 1
–
Properties
—
11n Properties
—
Virtual Access Point (VAP)
—
Interface 2
–
• Security
Wireless Security
–
RADIUS
–
MAC Access Control
–
• Quality of Service (QoS)
Enhanced Distributed Channel Access (EDCA)
–
802.1d to IP DSCP Mapping Table
–
802.1d to 802.1p Mapping Table
–
QoS Profile
–
QoS Policy
–
• Virtual Local Area Network (VLAN)
VLAN Ethernet Configuration
–
• Filters
Protocol Filters
–
Static MAC Address Filters
–
Advanced Filters
–
TCP/UDP Port Filters
–
Storm Threshold Filters
–
Packet Forwarding
–
• DHCP
DHCP Server
–
All the interface (radio) 2 parameters discussed in this chapter are applicable only to AP-8000.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
3
36