Proxim ORiNOCO AP-800 Installation And Management Manual page 160

Policy Table Configuration
To configure Policy table parameters do the following:
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
INDEX 1
Ipdscp : 6
Dscp Lower Limit : 48
Dscp Upper Limit : 55
INDEX 1
Ipdscp : 7
Dscp Lower Limit : 56
Dscp Upper Limit : 63
AP-00:7D:09(config-qos)# policy-table
AP-00:7D:09(config-qos-policy)# ?
Possible completions:
exit
rowedit
AP-00:7D:09(config-qos-policy)# rowedit 1 secondary-index 1 entry-status
enable
AP-00:7D:09(config-qos-policy)# rowedit 1 secondary-index 1 marking-status
enable
AP-00:7D:09(config-qos-policy)# rowedit 1 secondary-index 1
priority-mapping 12
AP-00:7D:09(config-qos-policy)# exit
AP-00:7D:09(config-qos)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show qos policy
// QoS POLICY TABLE CONFIGURATION //
INDEX 1.1
Policy Name : Default
Policy Type : inboundLayer2
Priority Mapping : 1
Marking Status : enable
Entry Status : enable
INDEX 1.2
Policy Name : Default
Policy Type : inboundLayer3
Priority Mapping : 1
Marking Status : enable
Entry Status : disable
INDEX 1.3
Policy Name : Default
Policy Type : outboundLayer2
Priority Mapping : 1
Marking Status : enable
Entry Status : disable
INDEX 1.4
Policy Name : Default
Policy Type : outboundLayer3
Priority Mapping : 1
Marking Status : enable
Entry Status : disable
Device Configuration, Management and Monitoring using CLI
Exits Back to Global Configure Mode
Policy Table Index Configuration
160