Hardware Overview and Installation
This chapter covers the hardware overview and installation procedures of the following products:
•
ORiNOCO
Hardware Overview
—
System Requirements
—
Product Package
—
Installation Procedure
—
•
ORiNOCO
Front View of the Device
—
Rear View of the Device
—
System Requirements
—
Product Package
—
Installation Procedure
—
•
ORiNOCO
Front View of the Device
—
Rear View of the Device
—
System Requirements
—
Product Package
—
Installation Procedure
—
:
• All the interface (radio) 2 parameters discussed in this chapter are applicable only to a dual-radio
device.
• For a quick reference on how to install and mount the device, please refer to the ORiNOCO
AP-8000, AP-8100 and AP-9100 Quick Installation Guides respectively.
2.1 Device Operational Modes
Device Type
AP-800
AP-8000
AP-8100
AP-9100
: The operational mode 'g/n' is backward compatible to mode 'b'.
®
ORiNOCO
802.11n & 802.11ac Access Points - Hardware Installation Guide
®
AP-800 and AP-8000
®
AP-8100
®
AP-9100
Operational Mode (With Supported Frequency Band)
Radio 1
802.11b/g/n (2.4 GHz)
802.11a/n (5 GHz)
802.11a/n (5 GHz)
802.11a/n/ac (5 GHz)
®
AP-800,
Radio 2
Not Applicable
802.11b/g/n (2.4 GHz)
802.11b/g/n (2.4 GHz)
802.11b/g/n (2.4 GHz)
2
9