Proxim ORiNOCO AP-800 Installation And Management Manual page 115

•
Out Errors: Specifies the number of outbound error packets that are not allowed to transmit.
•
Receive CRC Errors: Specifies the total number of CRC errors occurred if the data sent is corrupted.
•
Collision Frames: Specifies the total number of collision frames.
•
Career Sense Errors: Specifies the total number of frames that are not transmitted.
•
Frames Too Long: Specifies the total number of frames, which are too long than the configured packet size.
•
Deferred Transmissions: Specifies the total number of times the interface fails to transmit a frame.
•
MAC Transmit Errors: Specifies the total number of frames that do not get transmitted due to the MAC
sub-layer transmit error.
3. To view Wireless statistics, click Wireless1/Wireless2 in the Interface Statistics screen. The following Wireless
statistics screen appears based on radio mode (AP).
4. The following Interface statistics and VAP specific statistics are displayed.
•
Operational Status: Specifies the current operational status of the interface.
•
In Errors: Specifies the number of inbound packets with errors and that are restricted from being delivered.
•
Out Errors: Specifies the number of outbound error packets that are not allowed to transmit.
•
TxMulticast Frames: Specifies the total number of multicast frames transmitted.
•
TxDisacarded Frames: Specifies the total number of multicast frames discarded.
•
TxRetry Count: Specifies the total number of frames delivered with one or more retransmissions.
•
TxRTS Frames: Specifies the total number of requests for the RTS frames transmission.
•
TxRTS Failures: Specifies the total number of RTS frames requests that receive no response.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 5-2 Wireless1/Wireless2 Interface Statistics
Device Monitoring Using Web Interface
115