2. In the HTTP screen, click Browse to locate the configuration file. Select "v2flashcfg.cfg" for binary configuration file
and PXM-TBC.xml for text based configuration file. You can also manually enter the desired file name in the File
Name box. Please note that the file name should not contain any spaces or special characters.
3. To update the device with new configuration file, click Update.
4. Click Load to apply the updated changes.
5. Click Update & Load to update and load the configuration file on the device with a single operation.
:
• Reboot the device when you update the device with Binary Configuration file.
• Update and Load the device when you update the device with Text Based Configuration file.
• It is recommended not to navigate away from the update screen while the update is in progress.
4.2.2.2 Update Configuration Using TFTP
To update the device with configuration files by using TFTP, do the following:
1. Navigate to MANAGEMENT > File Management > Update Configuration. The Update Configuration screen
appears.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 4-6 Update Configuration by using HTTP
Figure 4-7 Update Configuration by using TFTP (Binary Configuration)
Device Management Using Web Interface
98