Radius - Proxim ORiNOCO AP-800 Installation And Management Manual

3.5.1.2 Edit an Existing AP Security Profile
To edit an existing AP security profile, click the Edit icon
Wireless Security Configuration screen. The Wireless Security Edit Row screen appears.
1. Configure the following parameters:
•
Profile Name: Specifies the name of the security profile selected. To configure, enter the desired Profile Name.
•
Authentication Mode: Specifies the security mode for the wireless network. The Auth Mode may vary between
None, WEP, PSK, 802.1x. (See
•
Entry Status: Specifies the status of the security profile selected. By default, it is enabled. To configure, select the
Entry Status from the drop down menu.
2. Click OK, to save the configured parameters.

3.5.2 RADIUS

Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides centralized Authentication,
Authorization, and Accounting (AAA) management for nodes to connect and use a network service.
The device supports the following Authentication and Accounting mechanisms:
•
MAC Access Control Via RADIUS Authentication: Allows only the MAC addresses that are registered on the
RADIUS server to access the wireless network.
•
802.1x Authentication using RADIUS: Refer
•
RADIUS Accounting: By using an external RADIUS server, the device can track and record the length of client
sessions by sending the RADIUS accounting messages per RFC2866. When a wireless client is successfully
authenticated, RADIUS accounting is initiated by sending an "Accounting Start" request to the RADIUS server. When
the wireless client session ends, an "Accounting Stop" request is sent to the RADIUS server.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 3-20 AP - Edit Wireless Security Profile
Create a New Security
802.1x Authentication
Device Configuration Using Web Interface
against the AP security profile that you wish to edit, in the
Profile)
61