Snmp Configuration - Proxim ORiNOCO AP-800 Installation And Management Manual

6.7.5 SNMP Configuration

: To configure the SNMP access status as enable / disable, refer
6.7.5.1 SNMP v1-v2c Configuration
6.7.5.2 SNMP v3 Configuration
:
• When SNMP version is configured to snmpv3, read-password and read-write-password are not configurable.
• For password configuration characters question mark (?), double quote ("), single quote ('), back slash (\) forward slash (/),
equal (=), hyphen (-) and blank spaces are not valid.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09# configure
AP-00:7D:09(config)# management
AP-00:7D:09(config-mgmt)# snmp
AP-00:7D:09(config-mgmt-snmp)# snmp-version snmpv1-v2c
Changes in SNMP Version requires reboot.
AP-00:7D:09(config-mgmt-snmp)# read-password 0123456
AP-00:7D:09(config-mgmt-snmp)# read-write-password 0123456
AP-00:7D:09(config-mgmt-snmp)# exit
AP-00:7D:09(config-mgmt)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show snmp
// SNMP v1-v2c CONFIGURATION //
SNMP Version
Snmp Read Password
Snmp Read Write Password
AP-00:7D:09# configure
AP-00:7D:09(config)# management
AP-00:7D:09(config-mgmt)# snmp
AP-00:7D:09(config-mgmt-snmp)# snmp-version snmpv3
AP-00:7D:09(config-mgmt-snmp)# v3-security-level authpriv
AP-00:7D:09(config-mgmt-snmp)# v3-auth-password public123
AP-00:7D:09(config-mgmt-snmp)# v3-auth-protocol sha
AP-00:7D:09(config-mgmt-snmp)# v3-priv-password public123
AP-00:7D:09(config-mgmt-snmp)# v3-priv-protocol aes-128
AP-00:7D:09(config-mgmt-snmp)#exit
AP-00:7D:09(config-mgmt)#exit
AP-00:7D:09(config)#exit
AP-00:7D:09# show snmp
// SNMP V3 CONFIGURATION //
SNMP Version
V3 Security Level
V3 Authentication Protocol
V3 Authentication Password
V3 Private Protocol
V3 Private Password
Device Configuration, Management and Monitoring using CLI
Access Control
: snmpv1-v2c
: ******
: ******
: snmpv3
: authPriv
: sha
: ******
: aes-128
: ******
176