Device Configuration - Proxim ORiNOCO AP-800 Installation And Management Manual

6.6.4 Device Configuration

• The interface (radio) 2 parameters discussed in this chapter, are applicable only to AP-8000.
• The '<value (1-2)>' of the radio mode index in CLI configuration, is only applicable to AP-8000.
• This chapter covers only the device's CLI configuration. For a detailed overview on device's features,
please refer to
6.6.4.1 Radio Mode Configuration
To configure the radio mode, enter the following CLI commands.
: Supported Radio modes depend on the license.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Device Configuration Using Web Interface
AP-00:7D:09(config)# radio-mode
AP-00:7D:09(config-radio)# ?
Possible completions:
exit
interface
AP-00:7D:09(config-radio)# interface ?
Possible completions:
1
<value (1-2)>
AP-00:7D:09(config-radio)# interface 1 radio-mode ap
Changes in Radio mode requires reboot.
AP-00:7D:09(config-radio)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show system-type
// NETWORK MODE CONFIGURATION
Network Mode
Active Network Mode
// SYSTEM TYPE CONFIGURATION
RADIO-INDEX 1
Supported Radio Modes
Supported Frequency/Country Domains
Frequency/Country Domain
Active Frequency Domain
RADIO-INDEX 2
Supported Radio Modes
Supported Frequency/Country Domains
Frequency/Country Domain
Active Frequency Domain
Device Configuration, Management and Monitoring using CLI
Exits Back to Global Configure Mode
Radio Mode Index
Radio Mode Index
Radio Mode Index
//
: bridge
: bridge
//
: AP(1)
: 201,203,204,205,206,207,208,209
210,211,213,214,215,216,217,218
219,220,221,222,223,224,225,226
227,228,229,230,231,232,233,234
235,236,237,238,239,240,241,242
243,244,245,246,247,253,254,255
256,257,258,259
: nocountry
: noCountry
: AP(1)
: 201,203,204,205,206,207,208,209
210,211,213,214,215,216,217,218
219,220,221,222,223,224,225,226
227,228,229,230,231,232,233,234
235,236,237,238,239,240,241,242
243,244,245,246,247,253,254,255
256,257,258,259
: nocountry
: noCountry
138