System Information - Proxim ORiNOCO AP-800 Installation And Management Manual

6.7.10 System Information

To configure the System Information entries, enter the following CLI commands.
:
• Setting factory-reset to yes or 1, will automatically reboot the device and the device will come up with default values.
• Product Description differs based on the License file present on the board.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09 # configure
AP-00:7D:09(config)#management
AP-00:7D:09(config-mgmt)# system-information
AP-00:7D:09(config-mgmt-sys-sysinfo)# ?
Possible completions:
email Email address of the contact person for the device
exit Exits Back to Global Configure Mode
factory-reset To reset the device to factory settings
gps-altitude The elevation of an access point
gps-latitude GPS Latitude Configuration
gps-longitude GPS Longitude Configuration
location Location of the system
phone-number Phone Number of the contact person for a device
system-name System Name Configuration
AP-00:7D:09(config-mgmt-sysinfo)# email name@Organization.com
AP-00:7D:09(config-mgmt-sysinfo)# system-name system
AP-00:7D:09(config-mgmt-sysinfo)# phone-number 1234567890
AP-00:7D:09(config-mgmt-sysinfo)# location systemlocation
AP-00:7D:09(config-mgmt-sysinfo)# gps-altitude 120
AP-00:7D:09(config-mgmt-sysinfo)# gps-latitude 37.3321
AP-00:7D:09(config-mgmt-sysinfo)# gps-longitude -121.8893
AP-00:7D:09(config-mgmt-sysinfo)# factory-reset yes
AP-00:7D:09(config-mgmt-sysinfo)#exit
AP-00:7D:09(config-mgmt)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show system-information
// SYSTEM INFORMATION CONFIGURATION //
System Uptime
System Description
System Name
Contact Mail
Phone Number
Location Name
Gps Longitude
Gps Latitude
Gps Altitude
Device Configuration, Management and Monitoring using CLI
: 0d-00h:45m:02s
: ORiNOCO AP-8000-WD-v4.0.0
: system
: name@Organization.com
: 1234567890
: systemlocation
: -121.8893
: 37.3321
: 120
180