Tftp; Sntp - Proxim ORiNOCO AP-800 Installation And Management Manual

6.7.8 TFTP

You can transfer a file to or from the device using TFTP. Make sure that the TFTP server is running and configured to point to
the directory containing the file. To configure TFTP, enter the following CLI commands.

6.7.9 SNTP

To configure SNTP, enter the following CLI commands.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09 (configure-mgmt)#tftp
AP-00:7D:09 (config-mgmt-tftp)#?
Possible completions:
exit Exits Back to Global Configure Mode
file-name File Name that has to be uploaded or downloaded from
the TFTP Server
file-type Type of file that is being uploaded or downloaded
operation-type TFTP Operation Type Configuration
server-ip IP address of the TFTP Server
AP-00:7D:09 (config-mgmt-tftp)#server-ip 169.254.128.133
AP-00:7D:09 (config-mgmt-tftp)#file-name image.sei
AP-00:7D:09 (config-mgmt-tftp)#file-type image
AP-00:7D:09 (config-mgmt-tftp)#operation-type none
AP-00:7D:09 (config-mgmt-tftp)#exit
AP-00:7D:09 (config-mgmt)#exit
AP-00:7D:09 (config)#exit
AP-00:7D:09# show tftp
// TFTP CONFIGURATION //
Server Ip : 169.254.128.133
File Name : image.sei
File Type : image
Operation Type : none
Operational Status : idle
AP-00:7D:09(config-mgmt)# sntp ?
Possible completions:
<[Enter]>
day-light-savingtime
primary-server-name
secondary-server-name
sntp-status
time-zone
AP-00:7D:09(config-mgmt-sntp)# sntp-status 1
AP-00:7D:09(config-mgmt-sntp)# day-light-savingtime 3
AP-00:7D:09(config-mgmt-sntp)# primary-server-name time.nist.gov
AP-00:7D:09(config-mgmt-sntp)# secondary-server-name 10.0.0.100
AP-00:7D:09(config-mgmt-sntp)# time-zone india
AP-00:7D:09(config-mgmt-sntp)# exit
AP-00:7D:09(config-mgmt)# exit
AP-00:7D:09(config)# exit
AP-00:7D:09# show sntp
// SNTP CONFIGURATION //
Status : enable
Primary Server Name : time.nist.gov
Seconday Server Name : 10.0.0.100
Time Zone : india
Daylight Saving Time : unchanged
Current Time : 01-01-1970 3:47:41
Device Configuration, Management and Monitoring using CLI
Execute this command
Day Light Saving Time Configuration
Primary SNTP server name
Secondary SNTP server name
Enable/disable the SNTP functionality
Specify the appropriate time zone
179