Wireless Security - Proxim ORiNOCO AP-800 Installation And Management Manual

3.5.1 Wireless Security

To configure the Wireless Security parameters, do the following:
1. Navigate to CONFIGURATION > Security > Wireless Security. The Wireless Security Configuration screen
appears.
2. The Wireless Security Configuration screen contains the following information for the user-defined security
profiles:
•
Profile Name: Specifies the user-defined name for a security profile.
•
Auth Mode: Specifies the security mode for the wireless network. The Auth Mode may vary between None,
WEP, PSK, 802.1x. (See
•
Entry Status: This parameter allows you to set the status for the user-defined security profiles. The available
status are
— Enable: Enables the user-defined Security profile.
— Disable: Disables the user-defined Security profile.
— Delete: Deletes the user-defined Security profile.
3. Click OK, to save the configured parameters.
3.5.1.1 Create a New Security Profile
To add a new security profile, click Add in the Wireless Security Configuration screen. The Wireless Security Add Row
screen appears.
1. Profile Name: Specifies the name of the Security Profile that is being created. To configure, enter the desired Profile
Name.
2. Authentication Mode: Specifies the security mode for the wireless network. Select any of the following
authentication modes for the wireless interface from the drop down menu.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 3-15 Wireless Security Configuration
Create a New Security Profile.)
Figure 3-16 Add Wireless Security Profile
Device Configuration Using Web Interface
58