Simple Network Management Protocol (Snmp)V1/V2C/V3 - Proxim ORiNOCO AP-800 Installation And Management Manual

1.4.2.2 Telnet
You can access the device through CLI by using Telnet. With Telnet, you can communicate with the device through your LAN
(switch, hub and so on), Internet, or with an ethernet cable connected directly to your computer's ethernet port.
1.4.2.3 Secure Shell (SSH)
You can securely access the device through CLI by using Secure Shell (SSH). The device supports SSH version 2, for secure
remote CLI (Telnet) sessions. SSH provides strong authentication and encryption of session data. The SSH server has host keys
- a pair of asymmetric keys (a private key that resides on the device) and a public key that is distributed to clients that need to
connect to the device. Clients need to verify that it is communicating with the correct SSH server.

1.4.3 Simple Network Management Protocol (SNMP)v1/v2c/v3

You can also configure, manage and monitor the device by using the Simple Network Management Protocol (SNMP). This
requires an SNMP Manager Program (sometimes called MIB browser) or a Network Manager program using SNMP. The device
supports the following Management Information Base (MIB) files that describe the parameters that can be viewed and/or
configured over SNMP:
•
PXM-SNMP.mib
•
RFC-1213.mib
•
RFC-1215.mib
•
RFC-2571.mib
•
RFC-2790.mib
•
RFC-3412.mib
•
RFC-3414.mib
•
IEEE 802.11mib
The Enterprise MIB defines the read and read-write objects that can be viewed or configured using SNMP. These objects
correspond to most of the settings and statistics that are available with the other management interfaces. All Read-Only (RO)
and Read-Write (RW) parameters supported by the IEEE802dot11-MIB are as tabulated below.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
S.No. MIB Object Name
1 dot11StationID
2 dot11PrivacyOptionImplemented
3 dot11PowerManagementMode
4 dot11DesiredSSID
5 dot11DesiredBSSType
6 dot11BeaconPeriod
7 dot11DTIMPeriod
8 dot11MultiDomainCapabilityImplemented
9 dot11MultiDomainCapabilityEnabled
10 dot11CountryString
11 dot11AuthenticationAlgorithmsIndex
12 dot11AuthenticationAlgorithm
13 dot11AuthenticationAlgorithmsEnable
14 dot11MACAddress
15 dot11RTSThreshold
Introduction
Access
(RO / RW)
RO
RO
RO
RW
RO
RW
RW
RO
RO
RO
RO
RO
RO
RO
RW
14