Logging Onto The Web Interface - Proxim ORiNOCO AP-800 Software Management Manual

3. Click OK to save the changes.
4. Click Rescan to verify the changes applied.
3.1.3.2 Assigning the IP Address Dynamically
: Before setting the IP Address Type as Dynamic, ensure there is a DHCP server on the network.
To change the IP Address type from Static to Dynamic, follow these steps:
1. Select the IP Address Type as Dynamic. The IP Address, Subnet Mask and the Gateway IP Address fields get
disabled.
2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.
3. Click OK to save the changes.
4. Click Rescan to verify the changes applied.
: The device automatically reboots after clicking OK.
To log on to the Web Interface, click Web Config.The user is then prompted to enter its username and password. For more
information on how to login, please see

3.2 Logging onto the Web Interface

Once the device is connected to your network, use a web browser to configure, manage and monitor the device. Enter the
device IP address (For example http://169.254.128.132) in the address bar or access the Web Interface by using ScanTool.
The user is prompted to enter the username and password. The default User Name is admin and Password is public.
:
• For security purposes, it is recommended to change the default Password to restrict unauthorized access to the device.
• Depending on the settings made during the device initialization, the IP address may be either a dynamic IP address
assigned by a network DHCP server or a static IP address which is manually configured. Refer to
information on how to determine the device's IP address and manually configure a new IP address.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Logging onto the Web Interface
Figure 3-3 Login Screen
Device Initialization
ScanTool
for
18