Proxim ORiNOCO AP-800 Installation And Management Manual page 155

Security RADIUS Supported Table
Enter the following command to configure the Security RADIUS Supported table entries.
MAC ACL
MAC ACL allows you to build a list of authorized wireless stations that can register with the device and access the network.
Perform the following commands to configure the operational mode of MAC-ACL.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09(config-sec)# radius
AP-00:7D:09(config-sec-rad)#supported-table
AP-00:7D:09(config-sec-rad-supported)# rowedit 1 entry-status enable
AP-00:7D:09(config-sec-rad-supported)# rowedit 1 max-retransmissions 3
AP-00:7D:09(config-sec-rad-supported)# rowedit 1 msg-response-time 3
AP-00:7D:09(config-sec-rad-supported)# rowedit 1 re-authentication 0
AP-00:7D:09(config-sec-rad-supported)# rowedit 1 profile-name
defaultradius
AP-00:7D:09(config-sec-rad-supported)#exit
AP-00:7D:09(config-sec-rad)#exit
AP-00:7D:09AP-00:7D:09(config-sec)#exit
AP-00:7D:09(config)#exit
AP-00:7D:09# show security radius supported-table
// RADIUS SUPPORTED TABLE CONFIGURATION //
INDEX 1
Profile Name : Default Radius
Max Re-Transmissions : 3
Message Response Time : 3
Re-Authentication Period: 0
Entry Status : enable
AP-00:7D:09(config)# security
AP-00:7D:09(config-sec)# macacl
AP-00:7D:09(config-sec-macacl)# ?
Possible completions:
address-table MAC Address Access Control List
exit Exits Back to Global Configure Mode
operation-type Operational Type Configuration
AP-00:7D:09(config-sec-macacl)# operation-type allow
AP-00:7D:09# show security macacl operational-type
// MAC ACL OPERATION TYPE//
Operation Type : allow
Device Configuration, Management and Monitoring using CLI
155