System; Network - Proxim ORiNOCO AP-800 Installation And Management Manual

3.1 System

The System feature enables you to configure system specific information.
To configure System parameters, do the following:
1. Navigate to CONFIGURATION > System. The System screen appears.
2. Configure the following parameters:
•
System Name: Specifies the name assigned to the device. To assign a name to the device, enter a name in the
System Name box. You can enter a name of maximum 64 characters.
•
Network Mode: Specifies the network mode of the device. The device supports only the Bridge mode.
3. Click OK, to save the configured parameters.

3.2 Network

The Network feature displays the network specific information of the device.
To view the Network mode, navigate to CONFIGURATION > Network. The Network Configuration screen appears. The
device supports only the Bridge mode.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 3-1 System
Figure 3-2 Network Configuration
Device Configuration Using Web Interface
37