Proxim ORiNOCO AP-800 Installation And Management Manual page 117

:
• IP Address is not applicable for a WDS enabled Station. By default, it is taken as 0.0.0.0
• IP Address is not applicable, if Proxy ARP is disabled.
•
VAP Number: Specifies the number of the VAP, enabled on either interface 1 or interface 2. Every interface
supports upto eight VAPs.
•
VAP Type: Specifies the type of the VAP enabled.
•
RSSI: Specifies the strength of the signal received by the wireless station. The signal strength detected by the radio
of the device, varies between the values 0 - 128. The higher the value, the greater is the received signal strength.
•
Tx Rate (Mbps): Specifies the rate at which the last data packet was received.
•
State: Specifies the present status of the station.
•
Disassociate: Specifies the parameter that allows you to disassociate a particular client from the device.
: Disassociate option is not applicable on a WDS enabled Station.
3. To view detailed station statistics, click
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Edit icon. The Statistics Screen appears:
Figure 5-4 Station Statistics - Edit
Device Monitoring Using Web Interface
117