Interface Statistics - Proxim ORiNOCO AP-800 Installation And Management Manual

5.1 Interface Statistics

Interface Statistics allow you to monitor the status and performance of the Ethernet and Wireless interfaces of the device.
To view interface statistics, do the following:
1. Navigate to MONITOR > Interface Statistics. The Interface Statistics screen appears.
2. To view Ethernet statistics, click Ethernet in the Interface Statistics screen. The following Ethernet statistics are
displayed.
•
Type: Specifies the type of interface.
•
MTU: Specifies the largest size of the data packet sent on the bridge.
•
Physical Address: Specifies the MAC address at the interface protocol layer.
•
Operational Status: Specifies the current operational status of the ethernet interface.
•
In Octets: Specifies the total number of octets received on the interface.
•
In Unicast Packets: Specifies the number of unicast subnetwork packets delivered at the higher level protocol.
•
In Non-Unicast Packets: Specifies the number of non-unicast subnetwork packets delivered at the higher level
protocol.
•
In Errors: Specifies the number of inbound packets with errors and that are restricted from being delivered.
•
Out Octets: Specifies the total number of octets transmitted out of the interface.
•
Out Unicast Packets: Specifies the total number of packets requested by the higher level protocol and then
transmitted to the non-unicast address.
•
Out Discards: Specifies the number of error-free outbound packets which are discarded to prevent them from
being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 5-1 Ethernet Interface Statistics
Device Monitoring Using Web Interface
114