Using Web Interface To Manage The Access Point; Web Interface Overview; Error Message - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point

This chapter contains information on configuring and managing settings for the various features that are available for the
Access Point using the Web Interface. The Web Interface is categorized in three sections and each section provides you
information on how to configure and manage your Access Points:
•

Web Interface Overview

•

Error Message

• Configuring the Device
• Managing the Device
• Monitoring the Device
To configure the AP using the Web interface, you must first log in to a web browser. See
Web Interface Overview
There are four important buttons in the graphical interface of the software. They are described below.
• Commit: Clicking this button affects the changes in the configuration of different parameters of the software.
• Reboot: Clicking this button reboots the device.
• Home: Clicking this button takes you to the Home page of the software.
• Help: Clicking this button shows you the context sensitive help for each and every new interface.
Figure 6-1 Commit (1), Reboot (2), Home (3) and Help (4) Buttons
Error Message
This error message, shown below, pops up when you try to configure a non-configurable parameter. This error message
asks you to verify your data to configure that particular parameter or warns you to a correct pathway.
AP-8000 User Guide
Logging In for instructions.
6
56