Proxim ORiNOCO AP-800 Installation And Management Manual page 168
Hide thumbs
Also See for ORiNOCO AP-800:
- Software management manual (187 pages) ,
- Hardware installation manual (35 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
Advanced Filters and Advance Filter Table
The following protocols are listed in the Advanced Filter Table,
•
Deny IPX RIP
•
Deny IPX SAP
•
Deny IPX LSP
•
Deny IP Broadcasts
•
Deny IP Multicasts
The device can filter these protocols in the wireless interface to ethernet direction, the ethernet to wireless direction, or in
both directions.To configure the advance filter table parameters, enter the following CLI commands.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
INDEX 14
Protocol Name
: IP-ARP
Protocol Number : 08:06
Filter Status
: block
Entry Status
: disable
INDEX 15
Protocol Name
: Novell(ECONFIG-E)
Protocol Number : 81:37
Filter Status
: block
Entry Status
: disable
INDEX 16
Protocol Name
: RARP-Reverse-ARP
Protocol Number : 80:35
Filter Status
: block
Entry Status
: disable
INDEX 17
Protocol Name
: SNMP-Over-Ethernet
Protocol Number : 81:4c
Filter Status
: block
Entry Status
: disable
INDEX 18
Protocol Name
: Xyplex
Protocol Number : 08:88
Filter Status
: block
Entry Status
: disable
INDEX 19
Protocol Name
: EAPOL-ether-type
Protocol Number : 88:8e
Filter Status
: block
Entry Status
: disable
INDEX 20
Protocol Name
: Test_Filter
Protocol Number : 08:01
Filter Status
: passthru
Entry Status
: enable
Device Configuration, Management and Monitoring using CLI
168
Advertisement
Table of Contents
Troubleshooting
