Table of Contents
Advertisement
Download Updates from your TFTP Server using the Web Interface
1. Download the latest software from http://www.proxim.com/support/.
2. Copy the latest software updates to your TFTP server.
3. In the Web Interface, click the Commands button and select the Download tab.
4. Enter the IP address of your TFTP server in the field provided.
5. Enter the File Name (including the file extension). Enter the full directory path and file name. If the file is located in
the default TFTP directory, you need enter only the file name.
6. Select the File Type from the drop-down menu (use Img for software updates).
7. Select Download & Reboot from the File Operation drop-down menu.
8. Click OK.
9. The Access Point will reboot automatically when the download is complete.
Download Updates from your TFTP Server using the CLI Interface
1. Download the latest software from http://www.proxim.com/support/.
2. Copy the latest software updates to your TFTP server.
3. Open the CLI interface via Telnet or a serial connection.
4. Enter the CLI password when prompted.
5. Type set tftpfilename <file name> (include the file extension) and press Enter.
6. Type set tftpfiletype img and press Enter.
7. Type set tftpipaddr <IP address of your TFTP server> and press Enter.
8. Type show tftp and confirm that the file name, file type, and IP address are correct.
9. Type download * and press Enter.
–
Result: The download will begin. Be patient while the image is downloaded to the Access Point.
10. When the download is complete, type reboot 0 and press Enter.
1 2 7 (
1 2 7 (
1 2 7 (
1 2 7 (
See
Command Line Interface (CLI)
Additional Hardware Features
•
Mounting Options
•
Kensington Security Slot
•
LED Indicators
Mounting Options
There are three mounting options for the AP-600, described below.
Desktop Mount
This is the standard installation for the AP-600. See
Wall Mount
Follow these steps to mount the AP-600 on a wall:
1. Identify the location where you intend to mount the unit.
1 2 7 (
1 2 7 (
1 2 7 (
1 2 7 (
For best results, mount the unit vertically. In other words, the antenna should be pointing up or down but not
sideways.
2. Unplug the Access Point's power supply, if necessary.
3. Use a Phillips screwdriver to remove the metal base from the underside of the AP-600, if necessary.
4. Press down on the cable cover lock to release the cable cover. See
5. Remove the cable cover from the unit. See
6. Remove the front cover from the unit. See
Installation & Basic Configuration
for more information.
Installation
for instructions.
Unlock the Cable Cover
Remove Cable Cover
for an illustration.
Remove the Front Cover
for an illustration.
for an illustration.
28
Advertisement
Table of Contents
