Step 7: Mount The Device - Proxim Tsunami 800 Series Hardware Installation Manual

4. Tighten the assembled parts (Torque 15 N . m/130 in-lbs).
The following figure shows the full assembled mounting hardware fixed to the device.

Step 7: Mount the Device

1. To pole-mount the device, insert the provided screws and washers through bracket (F). Fasten around the pole to
bracket (C) and secure (Torque 11 N.m/100 in-lbs).
®
Tsunami 800 and 8000 Series - Hardware Installation Guide
800 Series - Hardware Overview and Installation
Figure 2-5 Assembled Device
Figure 2-6 Pole Mounting
22