2. Click TFTP.
3. You can update the device with two configuration files: Binary and Text Based
4. To update the device with Binary Configuration file, select Binary Config.
•
Server IP Address: Specifies the IP Address of the TFTP server. To configure, enter the Server IP Address.
•
File Name: Specifies the name of the Binary file (including the file extension) that has to be downloaded onto the
device. To configure, enter the Binary File Name with extension.
5. To update the device with Text Based Configuration files, select Text Based Config.
•
Server IP Address: Specifies the IP Address of the TFTP server. To configure, enter the Server IP Address.
•
File Name: Specifies the name of the Text based file (including the file extension) that has to be downloaded onto
the device. To configure, enter the Text based File Name with extension.
Figure 4-8 Update Configuration by using TFTP (Text Based Configuration)
6. To update the device with new configuration file, click Update.
7. Click Load to apply the updated changes.
8. Click Update & Load to update and load the configuration file onto the device with one single operation.
:
• Reboot the device when you update the device with Binary Configuration file.
• Update and Load the device when you update the device with Text Based Configuration file.
• It is recommended not to navigate away from the update screen while the update is in progress.
4.2.3 Retrieve from Device
4.2.3.1 Retrieve from Device by using HTTP
To retrieve Configuration files, Event Logs and Text Based Templates from the device by using HTTP, do the following:
1. Navigate to MANAGEMENT > File Management > Retrieve from Device. The Retrieve from Device screen
appears.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Device Management Using Web Interface
99