Proxim ORiNOCO AP-800 Installation And Management Manual page 29

4. Operational Mode:
For details on how to change the operational mode, refer to Properties.
5. Current Bandwidth: By default, the current bandwidth is set to 40 MHz. For details on how to change the current
bandwidth, refer to Properties.
6. Commit: To apply the configured parameters on the device, you should perform a commit operation. For details on
how to commit, refer to Commit.
7. Reboot: For any change in the key parameters to take effect, you should perform a Reboot operation. For details on
how to Reboot, refer to Reboot.
8. SSID:
For details on how to change SSID, refer to
9. Security: By default the security is set to None. For details, refer to
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Device
Type
AP-800
AP-8000
Device
Type
Radio 1
AP-800 My Wireless Network 1_1
AP-8000 My Wireless Network 1_1
Operational Mode
Radio 1 Radio 2
802.11g/n Not Applicable
802.11a/n 802.11g/n
SSID
My Wireless Network 2_1
Virtual Access Point (VAP).
Wireless
Installation and Initialization
Radio 2
Not Applicable
Security.
29