6.8.3 Clear Statistics
To clear the event log or syslog messages, use the following CLI commands:
6.8.4 Station Disassociate
To disassociate a station, enter the following CLI commands.
: Disassociate option is not applicable on a WDS enabled Station.
6.8.5 Statistics Information
Enter following CLI commands to view the statistics information.
6.8.6 Wireless Interface Black List Statistics
Enter the following CLI commands to view the black listed channel statistics.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
AP-00:7D:09#
AP-00:7D:09# clear ?
Possible completions:
eventlog-messages
Clear the Event log Messages
syslog-messages
Clear the system log Messages
To Clear Eventlog Messages:
AP-00:7D:09# clear eventlog-messages
To Clear Syslog Messages:
AP-00:7D:09# clear syslog-messages
AP-00:7D:09(config)# monitor
AP-00:7D:09(config-mon)# station-disassociate 00:21:86:51:e4:c5
AP-00:7D:09# show statistics ?
Possible completions:
black-list
ethernet-statistics
icmp
interface
iparp
no-of-radios-connected
no-of-stations-connected
radius-accounting
radius-authentication
wireless-station
wireless-statistics
AP-00:7D:09# show statistics black-list
// WIRELESS INTERFACE BLACK LIST INFORMATION //
INDEX 1.1
Channel Number
: 60
Reason
: RADAR
TimeElapsed
: 0
Device Configuration, Management and Monitoring using CLI
Wireless Interface BlackList Information
Display Ethernet Statistics Information
ICMP Statistics Information
Interface Statistics Information
IP Arp Statistics Information
Number of Radios Connected
Number of Station Connected Configuration
Radius Accounting Statistics
Radius Authentication Statistics Information
Wireless Station Statistics Information
Display the Wireless Statistics Information
186