Proxim ORiNOCO AP-800 Installation And Management Manual page 67

2. The QoS EDCA screen is categorized under two headings, namely, STA EDCA Table and AP EDCA Table. The STA EDCA
Table allows you to configure the EDCA parameters for the station, and AP EDCA Table allows you to configure the
EDCA parameters for the AP.
3. To modify the EDCA parameters of the station or AP, click Edit under the respective categories. The STA EDCA Table
- Edit Entries/AP EDCA Table - Edit Entries screen appears.
: The EDCA Profile name is a read-only parameter and cannot be configured. It is always taken as Default.
4. Configure the following parameters:
•
Access Category: This parameter represents a label for the common set of EDCA parameters that are used by a
QoS STA/AP to contend for the channel in order to transmit MSDUs with certain priorities. This is a read-only
parameter and the available Access Categories are as follows:
— Background
— Best Effort
— Video
— Voice
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Figure 3-25 STA EDCA Table (left) /AP EDCA Table (right) - Edit Entries
Device Configuration Using Web Interface
67