Configuration Parameters - Proxim Harmony 8550 Manual

This chapter describes the operating parameters that can be configured for the 802.11b
Access Point within the Harmony Access Point Management tool.
Follow these steps to view the Access Point's configuration parameters:
1. Open the Harmony Access Point Management tool, as described in Chapter 4.
2. Click the <Configure> button.
3. When prompted, enter the management tool's User Name and Password. The
User Name is "admin". The default Password is "proxim". The User Name and
Password are case-sensitive.
3. Select one of the four tabs (Network, Radio, Security, and System Access) to
view the configuration settings for the Access Point.
4. Change the configuration settings as necessary.
Note:
If you make a mistake while configuring the Access Point, click <Reset> to
clear any changes you made and return each parameter to its current setting.
5. When finished, click <Submit> to save the changes. The changes will take effect
immediately, except for the Network parameters, which will not take effect until
the Access Point is rebooted.
The 802.11b Access Point Network Configuration screen is shown in the following
example.

5. Configuration Parameters

34