Installation and Initialization
Figure 2-10 Commit
Click OK, if you wish to commit the changed parameters.
On successful Commit operation, the following screen appears:
Figure 2-11 Commit Status
If the configured parameters requires reboot, on committing the following screen appears.
Figure 2-12 Commit Status with Reboot Message
2.9.2 Reboot
Reboot operation is required for any change in the key parameters to take effect. For example, settings such as configuring
the Radio Mode, IP Address, and Network Mode need reboot to take effect. On clicking REBOOT, system displays a
confirmation window as shown below.
Figure 2-13 Reboot
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
31