Table of Contents
Advertisement
Configuration
Using the Access Point's Web Configuration Tool
Navigate through the web configuration tool using the tabs at the top of each screen.
The parameters for each configuration screen are described in this chapter.
1.
Access the web configuration tool as described in"Connecting to the Access
Point" on page 15.
2.
The Status screen appears.
3.
Click the Configure tab at the top of the screen.
4.
You will be prompted for a User Name and Password.
5.
Enter any User Name (or leave the field blank).
6.
Enter the word default as the password. The field is case and space sensitive.
Note:
7.
Use the tabs at the top of your screen to navigate through the utility and change
or confirm the Access Point's configuration. Configuration options are described
in this chapter beginning on the next page.
8.
When finished, click the Submit or Apply button at the bottom of the screen to
save the changes. The changes will take effect immediately, except for the
Network parameters, which will not take effect until the Access Point is rebooted.
You can change the Password at any time using the System Access feature of
the web configuration tool (see page 25).
17
Advertisement
Table of Contents
