D To Ip Dscp Mapping Table - Proxim ORiNOCO AP-800 Installation And Management Manual

Tabulated below are the default EDCA parameters for the Station and AP, specific to each Access Category.
Access
Category
Background
Best Effort
Video
Voice
•
CW Min: Specifies the minimum value for Contention Window (CW) for the wireless QoS EDCA profile. To
configure, enter the CW Min in the range of 0 to 32767, for both Station and AP.
•
CW Max: Specifies the maximum value for Contention Window (CW) for the wireless QoS EDCA profile. To
configure, enter the CW Max in the range of 0 to 32767, for both Station and AP.
•
AI FSN: Specifies the Arbitration Inter-Frame Space Number (AI FSN) per access category. To configure, enter the
AI FSN in the range of 2 to 15 for station and 1 to 15 for AP.
•
TxOP: The Transmission Opportunity Limit (TxOP) is an interval during which a particular QoS enhanced client has
the right to initiate a frame exchange on the wireless medium. The TxOP Limit defines the upper limit based on
the TxOP value a wireless entity can obtain for a particular access category.
To configure, enter the TxOP in the range of 0 to 8160, for both station and AP.
•
ACM: The Admission Control Mandatory (ACM) defines if an AP accepts or rejects a request traffic stream with
certain QoS specifications, based on available channel capacity and link conditions.
To configure ACM for each access category, select either Enable or Disable from the drop down menu.
5. Click OK, to save the configured parameters.

3.6.2 802.1d to IP DSCP Mapping Table

To configure priority mapping between QoS 802.1d and IP DSCP (Differentiated Services Code Point) (for layer 3 policies), do
the following:
1. Navigate to CONFIGURATION > QoS > 802.1d to IP DSCP Map Tbl. The 802.1d to IP DSCP Mapping Table screen
appears.
ORiNOCO® AP-800 and AP-8000 Installation and Management Guide
Default EDCA Parameters for Station
CW CW AIFS
Min
Max
15 1023 7
15 1023 3
7 15 2
3 7 2
Figure 3-26 802.1d To IP DSCP Mapping Table
Device Configuration Using Web Interface
Default EDCA Parameters for AP
Tx OP CW
(Unsigned Min
Integer)
0 15
0 15
3.008 ms 7
1.504 ms 3
CW AIFS
Max
1023 7 0
63 3 0
15 1 3.008 ms
7 1 1.504 ms
Tx OP
(Unsigned
Integer)
68